2/3/2024 0 Comments Kenton midi patchbayHere is a link to the Kenton MIDI USB Host MKII Owner's Manual This product is supplied with a multi-region power supply which is suitable for use in the UK, EU, US/Canada and AUS/NZ. It is attractively finished in brushed aluminium with black screen print.ĩ0mA, 2.1mm plug (center positive) - 1 Amp available for attached USB deviceĥV DC (regulated) - use only the supplied adaptor (never use an unregulated supply as unregulated supplies typically give a This product is supplied with a multi-region power supply suitable for use in most countries. The purpose of this Kenton box is to convert the AE-10 / AE-10G USB MIDI to a standard 5 pin MIDI Output. The AE-10 / AE-10G needs to be powered at all times from its built in batteries or via it AC wall adapter. Roland AE-10 / AE-10G users: Please note that the AE-10 / AE-10G is NOT a USB bus powered device, so these Kenton boxes cannot provide power to the Roland AE-10 / AE-10G wind controller. This is great and it makes our Kenton boxes a very elegant way to connect your Akai EWI-USB to your older legacy 5 pin MIDI devices. The MIDI USB HOST is powered by a regulated 5V mains adaptor (supplied), and can supply up to 1 Amp of buss power to the attached USB device (assuming the USB device is USB powered).Īkai EWI USB Users: Unlike some other seemingly similar devices, the Kenton USB Host MKII that we sell here at Patchman Music will also provide power to the Akai EWI USB. We here at Patchman Music have tested this device with the Akai EWI USB and the Roland AE-10 / AE-10G Aerophone wind controllers and they worked great! IMPORTANT: The attached USB MIDI device MUST be 'Class Compliant'. MIDI data received from the USB device will be sent to the MIDI Out socket. MIDI data received at the MIDI In socket will be sent to the USB device. It has a USB Host port (USB A type socket), a MIDI In and a MIDI Out (both 5 pin DIN). The Kenton MIDI HOST mk2 provides MIDI In & Out sockets for USB MIDI keyboards and controllers which have only a USB B type socket. Your USB device is plugged into the USB MIDI Host mkII instead of into a computer. We here at Patchman Music have tested this device with the Akai EWI USB and the Roland AE-10 / AE-10G Aerophone wind controllers and they worked great with the Kenton MIDI USB Host MKII! The Kenton MIDI USB Host MKII will interface with the USB port on your EWI USB or AE-10 / AE-10G Aerophone and provide a MIDI OUT connection that you can connect to your MIDI synths so that you can control them with the wind controller. If you are looking for a way to connect your Akai EWI USB or Roland AE-10 / AE-10G Aerophone to your MIDI synths- here is your solution. Music is the authorized USA dealer for the wonderful Kenton MIDI USB Host MKII. Kenton USB MIDI Host MKII - USB to MIDI Converter for 'Class Compliant' USB MIDI Devices Patchman Music Kenton USB MIDI Host MKII Store The
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |